New Jersey Snow Plowing Guide

New Jersey Snow Plowing Guide

Snow removal can be very annoying even if you have the right tools so many people decide to hire someone to do it for them. There are many tools you don’t know about that can make your life much easier during winter. It is a great business opportunity for areas where it snows a lot and stays for a longer period of time but it isn’t something you don’t need knowledge of because the equipment can be easily damaged.

The price for New Jersey snow plowing will depend on the company and how good their equipment is. Sometimes the town will pay for certain areas to get clean like main roads but for smaller parts of the town that isn’t the case. You will need to know how to keep it clean if you want to get your car out of the garage. There are many tips and tricks you can find online, you only need to do some research.

V-Plowing Tips

You can find many types of plows on the internet but V-snowplow is one of the types that have a variety of blade positions like v-position or angle, straight, scoop and anything within that range. When the blade is retracted towards the truck, it is V position which is mostly used for first passes. It can go through deep snow which is the most important part.

As the same says, scoop position is meant to control where you want to carry the snow. It’s mostly used in areas where you can push the debris straight forward like at parking lots. You will see it a lot during the winter period because it’s used to finish the job. When there is deep snow, you should lift the plow a few inches off the ground so you can clear the top layer. It should be V-position first and then angle-position or scoop. The equipment can be overloaded so it needs to be done this way.

Get more information here:

Straight Blade Plowing Tips

Even a homeowner can use straight blades besides professionals. It also has an angled and straight position. It’s not recommended for big piles because you will force the vehicle a lot. A more complex thing is to remove it from the edges of the building. That should be done with the raised blade until you came to the edge and then lower the blade and pull away. When you finish, you can use a straight position to push it directly ahead.

The same process is used for deep snow like with V-plowing. When there are two inches of snow you can use a full blade width and as it rises, use less of the blade so it will be cleaned more easily. When the snow is we you should finish the job as quickly as you can. It can freeze very fast and in the morning, turn into tank traps.


For every tool you use, there should be a manual. Make sure you read it thoroughly and take safety precautions. For emergencies, you should have safety equipment including a shovel, bag of salt or sand, lock deicer, an ice scraper, jumper cables, first aid kit, flares, flashlight, tow strap and a tool kit. Also, make sure you have a warm jacket with sunglasses, gloves and a hat.

Always inspect your vehicle before going because it will be under stress when moving large piles. The fuel tank needs to be full. Snowplow is a part of the equipment that is attached to the vehicles so check if the bolts are tight. Because other cars may go your way, there needs to be proper lightning that other drivers can see. Read more on this link.

What Not To Do?

There are some regulations you need to follow that are supported by law including going onto someone’s property. Even if it will benefit them to have a clean yard, you can’t clean or pile snow on their property. The same goes for sidewalks or streets which is public property. Things to avoid include fire hydrants, electrical boxes, water drains, dumpsters and mailboxes and any other structure. You should always check local regulations before pushing snow across the road because it is illegal in many areas. It can be a tough job but profitable if you know what you are doing.

Home Improvement